Accessories set phase busbar 1-p sw./bl.act. 24/12-g [831400]
Set of phase busbars, 1-pole for switching actuator, 24-gang/ blind actuator,
12-gang for Gira One and KNX 6 pieces phase rails, 4 units end caps
Gira operating devices for KNX
6 pieces phase rails, 4 units end caps

Features:
- Actuator for switching devices or for controlling blinds, shutters, awnings,
skylight operation.
- In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into
one blind output.
- Mixed operation at one actuator (e.g. A1 and A2 blind, A3 & A4 blind, A5
switching, A6 switching, etc.) is possible.
- Manual actuation of the outputs.
- Programming and start-up with the Gira Project Assistant (GPA), from
version 5.0.
- Encrypted data transfer between the Gira One devices.

Shading and ventilation function
- Control of slat blinds, shutters, awnings, skylights or roof domes.
- Runtimes optionally adjustable.
- Sun protection function with curtain or slat positions at the beginning or
end of the function that can be set for each output.
- Setting of the delay time at the beginning or end of the sunshine.
- Fabric stretching for awnings.
- In the event of an active wind alarm, e.g. with a conventional weather
station with zero-voltage relay outputs for the wind alarm, the blinds raise
and are automatically locked. The status of the binary input is monitored on a
cyclical basis.
- In the event of an active rain alarm, e.g. with a conventional weather
station with zero-voltage relay outputs for the rain alarm, the skylights or
roof domes close immediately and are automatically locked. The status of the
binary input is monitored on a cyclical basis.
- In the event of an active frost alarm, e.g. with a conventional weather
station with zero-voltage relay outputs for the frost alarm, active travel by
shutters is stopped and locked to protect the shutter motor. The status of the
binary input is monitored on a cyclical basis.
- Door contact query and visualisation in the Smart Home App: An open door
results in the raising and locking of the blind or shutter.

Switching functions
- NO contact or NC contact operation.
- Setting of a switch-on or switch-off delay.
- Staircase function; a pre-warning time can also be set.
- Parameterisation as a switching function for lights or socket outlets, a
garage door function or a door opener function, for example.
- Garage door function: The time for closing the relay can be parameterised.
- Door opener function: The time for closing the relay can be parameterised.

Technical data:
Gira One Medium: Twisted pair YCYM 2 x 2 x 0.8
Test voltage: 4 kV (KNX/EIB bus line)
Rated voltage: DC 21 to 32 V SELV
Switching capacity: AC 250 V, 16 A / AC1
Maximum switch-on current: 800 A (200 µs), 165 A (20 ms)
Current carrying capacity of adjacent outputs: Total 20 A
Connected load
- Ohmic load: 3000 W
- Capacitive load: 16 A, max. 140 µF
- Motors (blind or fan): 1380 W
- Light bulbs: 2300 W
- HV halogen lamps: 2500 W
- HV LED lamps: typically 400 W
- Wound electronic transformer: 1200 VA
- Tronic transformer: 1500 W
- Fluorescent lamps, uncompensated: 1000 VA
- Fluorescent lamps,lead-lag circuit: 2300 VA
- Fluorescent lamps, parallel-compensated: 1160 VA
- Mercury-vapour lamps, uncompensated: 1000 W
- Mercury-vapour lamps, parallel-compensated: 1160 W
Connections
- Gira One Bus: Connection and junction terminal
- Load: Screw terminals (max. 4 mm² or 2 x 2.5 mm²)
Current consumption
- 5023 00: 5 to 25 mA
- 5028 00: 5 to 25 mA
- 5030 00: 5 to 25 mA

Notes:
- Installation on DIN top-hat rail.
- Can be updated via the Gira Project Assistant (GPA)

Scope of supply:
- KNX connection and junction terminal included with delivery.

Make: Gira
Order No. 8314 00 6 pieces phase rails, 4 units end caps
Quantity: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx