System 106 stainl.steel Gira Keyless In fingerprint mod. [5551920]
System 106 Keyless In fingerprint module
Gira door stations
stainless steel

Merkmale:
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Start-up and administration via app.
- Use as a stand-alone device with Gira DCS switching actuators or in
combination with the Gira door communication system as a door call system for
buildings with several residential units.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.

Inputs and outputs
- Connector strip connection cable for Gira door communication system.

Technische Daten:
Power supply
- System: Flat ribbon cable, 10-pole
- 2-wire bus: via control device (DC 26 V ± 2 V) or via AS (DC 24 V
± 5 % 300 mA)
Power consumption
- Maximum: 1 W
- Stand-by mode: 700 mW with lighting
Relay
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- 2-wire bus: 2 x plug terminal
- Additional power supply: 2 x plug terminal
- System: 2 x connector strip
Resistance to EMD: Approx. 15 kV
Protection class: IP54
Ambient temperature: -25 °C to +70 °C
FAR: 1:10 000 000
FRR: 1:100

Hinweise:
- Children’s fingers can usually only be reliably recognised from 6 years of
age.

Fabrikat: Gira
Bestell-Nr. 5551 920 stainless steel
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 106 alum. Gira Keyless In fingerprint mod. [5551926]
System 106 Keyless In fingerprint module
Gira door stations
aluminium

Merkmale:
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Start-up and administration via app.
- Use as a stand-alone device with Gira DCS switching actuators or in
combination with the Gira door communication system as a door call system for
buildings with several residential units.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.

Inputs and outputs
- Connector strip connection cable for Gira door communication system.

Technische Daten:
Power supply
- System: Flat ribbon cable, 10-pole
- 2-wire bus: via control device (DC 26 V ± 2 V) or via AS (DC 24 V
± 5 % 300 mA)
Power consumption
- Maximum: 1 W
- Stand-by mode: 700 mW with lighting
Relay
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- 2-wire bus: 2 x plug terminal
- Additional power supply: 2 x plug terminal
- System: 2 x connector strip
Resistance to EMD: Approx. 15 kV
Protection class: IP54
Ambient temperature: -25 °C to +70 °C
FAR: 1:10 000 000
FRR: 1:100

Hinweise:
- Children’s fingers can usually only be reliably recognised from 6 years of
age.

Fabrikat: Gira
Bestell-Nr. 5551 926 aluminium
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 106 traffic white(lac.) Gira Keyless In fingerprint mod. [5551902]
System 106 Keyless In fingerprint module
Gira door stations
traffic white (laquered)

Merkmale:
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Start-up and administration via app.
- Use as a stand-alone device with Gira DCS switching actuators or in
combination with the Gira door communication system as a door call system for
buildings with several residential units.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.

Inputs and outputs
- Connector strip connection cable for Gira door communication system.

Technische Daten:
Power supply
- System: Flat ribbon cable, 10-pole
- 2-wire bus: via control device (DC 26 V ± 2 V) or via AS (DC 24 V
± 5 % 300 mA)
Power consumption
- Maximum: 1 W
- Stand-by mode: 700 mW with lighting
Relay
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- 2-wire bus: 2 x plug terminal
- Additional power supply: 2 x plug terminal
- System: 2 x connector strip
Resistance to EMD: Approx. 15 kV
Protection class: IP54
Ambient temperature: -25 °C to +70 °C
FAR: 1:10 000 000
FRR: 1:100

Hinweise:
- Children’s fingers can usually only be reliably recognised from 6 years of
age.

Fabrikat: Gira
Bestell-Nr. 5551 902 traffic white (laquered)
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 106 stainl.steel V4A Gira Keyless In fingerprint mod. [5551914]
System 106 Keyless In fingerprint module
Gira door stations
stainless steel V4A

Merkmale:
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Start-up and administration via app.
- Use as a stand-alone device with Gira DCS switching actuators or in
combination with the Gira door communication system as a door call system for
buildings with several residential units.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.

Inputs and outputs
- Connector strip connection cable for Gira door communication system.

Technische Daten:
Power supply
- System: Flat ribbon cable, 10-pole
- 2-wire bus: via control device (DC 26 V ± 2 V) or via AS (DC 24 V
± 5 % 300 mA)
Power consumption
- Maximum: 1 W
- Stand-by mode: 700 mW with lighting
Relay
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- 2-wire bus: 2 x plug terminal
- Additional power supply: 2 x plug terminal
- System: 2 x connector strip
Resistance to EMD: Approx. 15 kV
Protection class: IP54
Ambient temperature: -25 °C to +70 °C
FAR: 1:10 000 000
FRR: 1:100

Hinweise:
- Children’s fingers can usually only be reliably recognised from 6 years of
age.

Fabrikat: Gira
Bestell-Nr. 5551 914 stainless steel V4A
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 106 bronze Gira Keyless In fingerprint mod. [5551921]
System 106 Keyless In fingerprint module
Gira door stations
bronze

Merkmale:
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Start-up and administration via app.
- Use as a stand-alone device with Gira DCS switching actuators or in
combination with the Gira door communication system as a door call system for
buildings with several residential units.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.

Inputs and outputs
- Connector strip connection cable for Gira door communication system.

Technische Daten:
Power supply
- System: Flat ribbon cable, 10-pole
- 2-wire bus: via control device (DC 26 V ± 2 V) or via AS (DC 24 V
± 5 % 300 mA)
Power consumption
- Maximum: 1 W
- Stand-by mode: 700 mW with lighting
Relay
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- 2-wire bus: 2 x plug terminal
- Additional power supply: 2 x plug terminal
- System: 2 x connector strip
Resistance to EMD: Approx. 15 kV
Protection class: IP54
Ambient temperature: -25 °C to +70 °C
FAR: 1:10 000 000
FRR: 1:100

Hinweise:
- Children’s fingers can usually only be reliably recognised from 6 years of
age.

Fabrikat: Gira
Bestell-Nr. 5551 921 bronze
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 106 black m(lac.) Gira Keyless In fingerprint mod. [5551925]
System 106 Keyless In fingerprint module
Gira door stations
black matt (lacquered)

Merkmale:
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Start-up and administration via app.
- Use as a stand-alone device with Gira DCS switching actuators or in
combination with the Gira door communication system as a door call system for
buildings with several residential units.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.

Inputs and outputs
- Connector strip connection cable for Gira door communication system.

Technische Daten:
Power supply
- System: Flat ribbon cable, 10-pole
- 2-wire bus: via control device (DC 26 V ± 2 V) or via AS (DC 24 V
± 5 % 300 mA)
Power consumption
- Maximum: 1 W
- Stand-by mode: 700 mW with lighting
Relay
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- 2-wire bus: 2 x plug terminal
- Additional power supply: 2 x plug terminal
- System: 2 x connector strip
Resistance to EMD: Approx. 15 kV
Protection class: IP54
Ambient temperature: -25 °C to +70 °C
FAR: 1:10 000 000
FRR: 1:100

Hinweise:
- Children’s fingers can usually only be reliably recognised from 6 years of
age.

Fabrikat: Gira
Bestell-Nr. 5551 925 black matt (lacquered)
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx