Electronics S3000 uni.LED dim. Mini [244000]
System 3000 universal LED dimmer Mini
Gira System 3000

Merkmale:
- Switching and dimming light bulbs, HV halogen lamps, electronic transformers
for halogen or LED lights, dimmable inductive transformers for halogen or LED
lights, HV LED or compact fluorescent lamps.
- Operation via auxiliary units.
- Automatic or manual setting of dimming principle according to load (leading
or trailing edge).
- Display of the selected operating mode using LED.
- Switch-on function that preserves the life of the lamp.
- Switch-on brightness can be saved permanently.
- Switch on with the last brightness set, or a saved switch-on brightness.
- Minimum brightness can be set.
- Electronic short-circuit protection.
- Electronic excess-temperature protection.
- Operation with or without a neutral conductor connection.

Technische Daten:
Rated voltage: AC 230 V, 50/60 Hz
Standby: max. 0.3 W
Connected load at 25 °C
- HV LED lamps (leading edge): typically 3 to 50 W
- HV LED lamps (trailing edge): typically 3 to 100 W
- Compact fluorescent lamp: typically 3 to 50 W
- Light bulbs: 20 to 210 W
- HV halogen lamps: 20 to 210 W
- Tronic transformers: 20 to 210 W
- Electronic transformer with LV LED (leading edge): typically 20 to 50 W
- Electronic transformer with LV LED (trailing edge): typically 20 to 100 W
- Wound electronic transformer: 20 to 210 VA
- Wound transformer with NV-LED: typically 20 to 50 VA
Auxiliary units
- Non-illuminated mechanical push buttons: unlimited
- 2-wire auxiliary insert: unlimited
- 3-wire auxiliary insert: 10
Cable length
- Auxiliary unit: Max. 100 m
- Load: Max. 100 m
Installation: in device box pursuant to DIN 49073, in combination with a
suitable cover
Connection cross section
- Single-wire: Max. 4 mm²
- Fine-wire without core jacket: Max. 4 mm²
- fine-wire with core jacket: Max. 2.5 mm²
Ambient temperature: -5 °C to +45 °C
Dimensions: Dia. 48, H 19.5 mm

Hinweise:
- In principle, it is possible to operate the dimmer without connecting the
neutral conductor, but some LED and CFLi light sources make the neutral
conductor connection necessary to avoid flickering.
- Operation without a neutral conductor increases the minimum load for light
bulbs, HV halogen lamps, Tronic transformers and wound transformers to 50 W.
- Electronic transformers and ballast devices for LED lamps can be operated
with the dimming procedure specified by the manufacturer.
- The switch-on brightness cannot be saved using a button.
- The installation adapter mini housing is used for installation in false
ceilings<strong>5429 00</strong>.
- If the ambient temperature is higher than 25 °C, the connected load must
be reduced.

Fabrikat: Gira
Bestell-Nr. 2440 00 
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx