KNX DRA heat.act. Basic 6-g [211400]
Heating actuator Basic, 6-gang for KNX
Heating
DRA

Merkmale:
- Heating actuator for switching thermal servos for heating systems or cooling
ceilings.
- Control using 1-bit or 1-byte corrected variable telegrams.
- For 1-byte correcting variables, the outputs are controlled by pulse width
modulation (PWM).
- Valve drives with the characteristic "de-energised open" or "de-energised
closed" can be controlled.
- Servos with 24 V or 230 V rated voltage can be actuated.
- Overload protected, short-circuit-proof.
- Standard protection.
- Feedback via bus e.g. in the event of overload and short circuit.
- Switching the heating circuit pump (standard functions).
- Passive group feedback of the closed valve drives.

Technische Daten:
KNX medium: TP256
Outputs: 6
Contact type: Triac
Power loss: max. 1 W
Switching voltage: AC 24/230 V, 50/60 Hz
Switching current: 5 to 160 mA
Switch-on current: max. 1.5 A (2 s)
Number of drives per output
- AC 230 V drives: 4
- AC 24 V drives: 2
Connection cross section: Max. 4 mm²

Hinweise:
- Valves with the same operating voltage must be connected at all outputs.
- VDE approval in accordance with EN 60669-1, EN 60669-2-1.
- Installation on DIN top-hat rail.

Abmessungen:
Teilungseinheiten (TE): 4

Fabrikat: Gira
Bestell-Nr. 2114 00 DRA
Menge: 0 Stk
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx