System 55 cr.white RF wall transm. 2-g KNX [517801]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
cream white glossy

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 01 cream white glossy
Menge: 0 Stk
Einzelpreis: 121.90 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 55 p.white RF wall transm. 2-g KNX [517803]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
pure white glossy

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 03 pure white glossy
Menge: 0 Stk
Einzelpreis: 121.90 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 55 p.white m RF wall transm. 2-g KNX [517827]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
pure white matt

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 27 pure white matt
Menge: 0 Stk
Einzelpreis: 121.90 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 55 anthracite RF wall transm. 2-g KNX [517828]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
anthracite

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 28 anthracite
Menge: 0 Stk
Einzelpreis: 123.81 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 55 c.alum. RF wall transm. 2-g KNX [517826]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
colour aluminium

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 26 colour aluminium
Menge: 0 Stk
Einzelpreis: 125.71 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 55 black m RF wall transm. 2-g KNX [5178005]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
black matt

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 005 black matt
Menge: 0 Stk
Einzelpreis: 125.71 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 55 grey m RF wall transm. 2-g KNX [5178015]
RF wall transmitter, 2-gang, for KNX
Gira KNX RF
grey matt

Merkmale:
- The wall transmitter can be mounted on walls with screws or adhered to
smooth or transparent surfaces with a mounting plate.
- Project planning, commissioning and parameter setting are performed using
ETS (version 5 or later).
- Integrated USB Micro-B interface for local programming and can be used as a
KNX RF interface.
- Battery-operated device.
- Device supports KNX Secure.

"Switching" function
- Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no
reaction).
- Command with short or long keystroke.

"Dimming" function
- Command when the button is pressed can be set in the parameters
(brighter-ON, darker-OFF, brighter/darker-CHANGE).

"Blind" function
- Command when the button is pressed can be set in the parameters (UP, DOWN,
CHANGE).

“Value transmitter” function
- 1-byte, 2-byte, 3-byte, 14-byte ASCII.

“Colour” function
- RGB/RGBW colour control, toggling of 8 colour values.

“Scene auxiliary unit” function
- Scene retrieval and saving possible, toggling of 8 scenes.

“Individual” function
- Various function combinations when the button is pressed or released.
- With scene auxiliary unit: Memory function possible.

Technische Daten:
KNX medium: RF1.R
Start-up mode: S mode
Rated voltage: DC 3 V
Batteries: 1 x CR 2032
Ambient temperature: -5 °C to +45 °C
Wireless frequency: 868.3 MHz
Transmission power: max. 20 mW
Range (free field): approx. 100 m

Hinweise:
- Mounting on device box or on smooth, level surfaces using screws or
adhesives.
- A loss of range can occur when using metallic cover frames.
- Batteries are consumables and must be replaced regularly. Please observe the
regulations on the disposal of used batteries.

Lieferumfang:
- Batteries are included with delivery.
- Wireless wall transmitter, comes with mounting plate, adhesive film (privacy
protection for glass surfaces), and adhesive points for mounting on smooth,
level surfaces.

Fabrikat: Gira
Bestell-Nr. 5178 015 grey matt
Menge: 0 Stk
Einzelpreis: 125.71 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx