OneKNX DRA swit./blind act. 6-g/3-g 16 A Std [502300]
Switching actuator, 6-gang 16 A / blind actuator, 3-gang 16 A Standard for
Gira One and KNX
Switching / blinds Standard
DRA

Merkmale:
Function in the Gira One system
- Actuator for switching devices or for controlling blinds, shutters, awnings,
skylight operation.
- In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into
one blind output.
- Mixed operation at one actuator (e.g. A1 and A2 blind, A3 & A4 blind, A5
switching, A6 switching, etc.) is possible.
- Manual actuation of the outputs.
- Programming and start-up with the Gira Project Assistant (GPA), from
version 5.0.
- Encrypted data transfer between the Gira One devices.

Shading and ventilation function
- Control of slat blinds, shutters, awnings, skylights or roof domes.
- Runtimes optionally adjustable.
- Sun protection function with curtain or slat positions at the beginning or
end of the function that can be set for each output.
- Setting of the delay time at the beginning or end of the sunshine.
- Fabric stretching for awnings.
- In the event of an active wind alarm, e.g. with a conventional weather
station with zero-voltage relay outputs for the wind alarm, the blinds raise
and are automatically locked. The status of the binary input is monitored on a
cyclical basis.
- In the event of an active rain alarm, e.g. with a conventional weather
station with zero-voltage relay outputs for the rain alarm, the skylights or
roof domes close immediately and are automatically locked. The status of the
binary input is monitored on a cyclical basis.
- In the event of an active frost alarm, e.g. with a conventional weather
station with zero-voltage relay outputs for the frost alarm, active travel by
shutters is stopped and locked to protect the shutter motor. The status of the
binary input is monitored on a cyclical basis.
- Door contact query and visualisation in the Smart Home App: An open door
results in the raising and locking of the blind or shutter.

Switching functions
- NO contact or NC contact operation.
- Setting of a switch-on or switch-off delay.
- Staircase function; a pre-warning time can also be set.
- Parameterisation as a switching function for lights or socket outlets, a
garage door function or a door opener function, for example.
- Garage door function: The time for closing the relay can be parameterised.
- Door opener function: The time for closing the relay can be parameterised.

Function in the Gira KNX system
- Blind or switching operation can be parametrised. In blind operation, the
adjacent outputs (A1/A2, A3/A4...) are combined into one blind output. Mixed
operation at one actuator (e.g. A1 & A2 blind, A3 & A4 blind, A5
switching, A6 switching ...) is possible.
- Actively transmitting feedback or status messages can be delayed globally
after a bus voltage recovery or ETS programming operation.
- Manual operation of the outputs independently of KNX with intelligent LED
status displays for saving energy.
- Advanced manual actuation: Toggle between blind mode and switching mode
before starting up the ETS.
- Heartbeat function for monitoring the device, cyclical transmission 1 bit.
- Bistable relay.
- Supply from KNX bus, no additional power supply required.
- Simplified terminal connection (no terminal overlapping).

Blind functions
- Operating mode can be parametrised: Control of slat blinds, roller shutters,
awnings, skylights or ventilation flaps.
- Separately parameterisable curtain runtimes with runtime extension for
movements into the upper end position.
- For slat blinds, a slat runtime can be parametrised independently.
- Switchover time for change of direction and times for short and long-term
operation (Step, Move) can be set.
- Feedback on the curtain or slat position. In addition, feedback on an
invalid curtain position or a drive movement is possible.
- Assignments of up to 5 different safety functions (3 wind alarms, 1 rain
alarm, 1 frost alarm), or with cyclical monitoring. The safety functions
(objects, cycle times, priority) are created in a device-based manner for all
outputs. An assignment of individual outputs to the safety functions and the
safety reactions can be parametrised based on the channel.
- Blocking function can be implemented for each blind output.
- Simple sun protection: Sun protection function with fixed and variable
curtain or slat positions at the beginning or end of the function can be
activated separately for each output.
- Up to 16 internal scenes can be parametrised per output.
- Scene memory function: Additional visual feedback.
- Twilight function.
- Status messages for upper and lower end positions.

Switching functions
- Independent switching of the switching outputs.
- NO contact or NC contact operation.
- Switching feedback: transmitting to the bus cyclically or when there is a
change.
- Logical individual linking function for each output.
- Reaction upon bus voltage recovery can be set for each output (ON or no
reaction).
- Blocking function with feedback object can be parametrised for each channel.
- Time functions (switch-on and switch-off delay, staircase light function –
also with advance warning function).
- Integration into light scenes possible: Up to 16 internal scenes can be
parametrised per output.

Technische Daten:
Gira One Medium: Twisted pair YCYM 2 x 2 x 0.8
KNX medium: TP256
Test voltage: 4 kV (KNX/EIB bus line)
Rated voltage
- KNX: DC 21 to 32 V SELV
Switching capacity: AC 250 V, 16 A / AC1
Maximum switch-on current: 800 A (200 µs), 165 A (20 ms)
Current carrying capacity of adjacent outputs: Total 20 A
Connected load
- Ohmic load: 3000 W
- Capacitive load: 16 A, max. 140 µF
- Motors (blind or fan): 1380 W
- Light bulbs: 2300 W
- HV halogen lamps: 2500 W
- HV LED lamps: typically 400 W
- Wound electronic transformer: 1200 VA
- Tronic transformer: 1500 W
- Fluorescent lamps, uncompensated: 1000 VA
- Fluorescent lamps,lead-lag circuit: 2300 VA
- Fluorescent lamps, parallel-compensated: 1160 VA
- Mercury-vapour lamps, uncompensated: 1000 W
- Mercury-vapour lamps, parallel-compensated: 1160 W
Connections
- Gira One Bus: Connection and junction terminal
- KNX: Connection and junction terminal
- Load: Screw terminals (max. 4 mm² or 2 x 2.5 mm²)
Current consumption
- Gira One Bus: 5 to 25 mA

Hinweise:
- KNX Data Secure compatible.
- Fast application download (long frame support).
- Firmware can be updated using the Gira ETS Service App (additional
software).
- Can be updated via the Gira Project Assistant (GPA)
- Installation on DIN top-hat rail.

Lieferumfang:
- KNX connection and junction terminal included with delivery.

Abmessungen:
Teilungseinheiten (TE): 4

Fabrikat: Gira
Bestell-Nr. 5023 00 DRA
Menge: 0 Stk
Einzelpreis: 255.76 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx