System 70 p.white Gira Keyless In fingerprint mod. [261770]
Gira Keyless In Fingerprint reader System 70
Gira Keyless In
pure white glossy
Merkmale:
- Installation in a device box.
- Stand-alone device or in combination with the Gira door communication
system.
- During stand-alone operation, the integrated zero-voltage relay contacts are
used for switching actions, e.g. for door openers withtheir
ownPower supply(e.g. standard bell transformer).
- Commissioning with direct configuration without a PC or programming
software.
Inputs and outputs
- Switching contact: Two relays with zero-voltage 2-way switch contacts, load
capacity AC/DC 24 V / 1.6 A.
- Two connections for power supply.
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Detection of signs of life in the finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.
- The two integrated 2-way momentary contact relays can be assigned two
different fingers, e.g. thumb: control of door opening; index finger: switch
the outdoor lighting.
Inputs and outputs
- Connector strip connection cable for Gira door communication system.
Technische Daten:
Protection class
- System 55, Gira F100: IP20
- TX_44: IP44
Power supply
- from power supply for door communication: DC 24 V ±10%
- from door communication system: DC 26 V ± 2 V
Relay
- Quantity: 2
- Contact: 1 zero-voltage 2-way momentary contact
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- Connection cable for door communication: 1 x connector strip
- Relay: 3 screw terminals each
- Additional power supply: 2 x screw terminal
Resistance to EMD: up to 15 kV
Installation depth: 33 mm
Ambient temperature: -20 °C to +70 °C
Hinweise:
- Keyless In devices can be connected to the Gira HomeServer using the DCS-IP
gateway. This enables intelligent links. In this way, e.g. temporary or
one-time access authorisation can be easily granted. All data including access
authorisations can be managed centrally and flexibly using the Gira
HomeServer.
- Children’s fingers can usually only be reliably recognised from 6 years of
age.
- Integration into Profile 55 possible.
Fabrikat: Gira
Bestell-Nr. 2617 70 pure white glossy
Menge: 0 Stk
Einzelpreis: 688.87 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 70 p.white m(lac.) Gira Keyless In fingerprint mod. [261772]
Gira Keyless In Fingerprint reader System 70
Gira Keyless In
pure white matt (lacquered)
Merkmale:
- Installation in a device box.
- Stand-alone device or in combination with the Gira door communication
system.
- During stand-alone operation, the integrated zero-voltage relay contacts are
used for switching actions, e.g. for door openers withtheir
ownPower supply(e.g. standard bell transformer).
- Commissioning with direct configuration without a PC or programming
software.
Inputs and outputs
- Switching contact: Two relays with zero-voltage 2-way switch contacts, load
capacity AC/DC 24 V / 1.6 A.
- Two connections for power supply.
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Detection of signs of life in the finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.
- The two integrated 2-way momentary contact relays can be assigned two
different fingers, e.g. thumb: control of door opening; index finger: switch
the outdoor lighting.
Inputs and outputs
- Connector strip connection cable for Gira door communication system.
Technische Daten:
Protection class
- System 55, Gira F100: IP20
- TX_44: IP44
Power supply
- from power supply for door communication: DC 24 V ±10%
- from door communication system: DC 26 V ± 2 V
Relay
- Quantity: 2
- Contact: 1 zero-voltage 2-way momentary contact
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- Connection cable for door communication: 1 x connector strip
- Relay: 3 screw terminals each
- Additional power supply: 2 x screw terminal
Resistance to EMD: up to 15 kV
Installation depth: 33 mm
Ambient temperature: -20 °C to +70 °C
Hinweise:
- Keyless In devices can be connected to the Gira HomeServer using the DCS-IP
gateway. This enables intelligent links. In this way, e.g. temporary or
one-time access authorisation can be easily granted. All data including access
authorisations can be managed centrally and flexibly using the Gira
HomeServer.
- Children’s fingers can usually only be reliably recognised from 6 years of
age.
- Integration into Profile 55 possible.
Fabrikat: Gira
Bestell-Nr. 2617 72 pure white matt (lacquered)
Menge: 0 Stk
Einzelpreis: 698.15 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 70 anthracite(lac.) Gira Keyless In fingerprint mod. [261773]
Gira Keyless In Fingerprint reader System 70
Gira Keyless In
anthracite (lacquered)
Merkmale:
- Installation in a device box.
- Stand-alone device or in combination with the Gira door communication
system.
- During stand-alone operation, the integrated zero-voltage relay contacts are
used for switching actions, e.g. for door openers withtheir
ownPower supply(e.g. standard bell transformer).
- Commissioning with direct configuration without a PC or programming
software.
Inputs and outputs
- Switching contact: Two relays with zero-voltage 2-way switch contacts, load
capacity AC/DC 24 V / 1.6 A.
- Two connections for power supply.
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Detection of signs of life in the finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.
- The two integrated 2-way momentary contact relays can be assigned two
different fingers, e.g. thumb: control of door opening; index finger: switch
the outdoor lighting.
Inputs and outputs
- Connector strip connection cable for Gira door communication system.
Technische Daten:
Protection class
- System 55, Gira F100: IP20
- TX_44: IP44
Power supply
- from power supply for door communication: DC 24 V ±10%
- from door communication system: DC 26 V ± 2 V
Relay
- Quantity: 2
- Contact: 1 zero-voltage 2-way momentary contact
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- Connection cable for door communication: 1 x connector strip
- Relay: 3 screw terminals each
- Additional power supply: 2 x screw terminal
Resistance to EMD: up to 15 kV
Installation depth: 33 mm
Ambient temperature: -20 °C to +70 °C
Hinweise:
- Keyless In devices can be connected to the Gira HomeServer using the DCS-IP
gateway. This enables intelligent links. In this way, e.g. temporary or
one-time access authorisation can be easily granted. All data including access
authorisations can be managed centrally and flexibly using the Gira
HomeServer.
- Children’s fingers can usually only be reliably recognised from 6 years of
age.
- Integration into Profile 55 possible.
Fabrikat: Gira
Bestell-Nr. 2617 73 anthracite (lacquered)
Menge: 0 Stk
Einzelpreis: 698.15 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 70 black m(lac.) Gira Keyless In fingerprint mod. [261774]
Gira Keyless In Fingerprint reader System 70
Gira Keyless In
black matt (lacquered)
Merkmale:
- Installation in a device box.
- Stand-alone device or in combination with the Gira door communication
system.
- During stand-alone operation, the integrated zero-voltage relay contacts are
used for switching actions, e.g. for door openers withtheir
ownPower supply(e.g. standard bell transformer).
- Commissioning with direct configuration without a PC or programming
software.
Inputs and outputs
- Switching contact: Two relays with zero-voltage 2-way switch contacts, load
capacity AC/DC 24 V / 1.6 A.
- Two connections for power supply.
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Detection of signs of life in the finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.
- The two integrated 2-way momentary contact relays can be assigned two
different fingers, e.g. thumb: control of door opening; index finger: switch
the outdoor lighting.
Inputs and outputs
- Connector strip connection cable for Gira door communication system.
Technische Daten:
Protection class
- System 55, Gira F100: IP20
- TX_44: IP44
Power supply
- from power supply for door communication: DC 24 V ±10%
- from door communication system: DC 26 V ± 2 V
Relay
- Quantity: 2
- Contact: 1 zero-voltage 2-way momentary contact
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- Connection cable for door communication: 1 x connector strip
- Relay: 3 screw terminals each
- Additional power supply: 2 x screw terminal
Resistance to EMD: up to 15 kV
Installation depth: 33 mm
Ambient temperature: -20 °C to +70 °C
Hinweise:
- Keyless In devices can be connected to the Gira HomeServer using the DCS-IP
gateway. This enables intelligent links. In this way, e.g. temporary or
one-time access authorisation can be easily granted. All data including access
authorisations can be managed centrally and flexibly using the Gira
HomeServer.
- Children’s fingers can usually only be reliably recognised from 6 years of
age.
- Integration into Profile 55 possible.
Fabrikat: Gira
Bestell-Nr. 2617 74 black matt (lacquered)
Menge: 0 Stk
Einzelpreis: 698.15 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System 70 grey m(lac.) Gira Keyless In fingerprint mod. [261776]
Gira Keyless In Fingerprint reader System 70
Gira Keyless In
grey matt (lacquered)
Merkmale:
- Installation in a device box.
- Stand-alone device or in combination with the Gira door communication
system.
- During stand-alone operation, the integrated zero-voltage relay contacts are
used for switching actions, e.g. for door openers withtheir
ownPower supply(e.g. standard bell transformer).
- Commissioning with direct configuration without a PC or programming
software.
Inputs and outputs
- Switching contact: Two relays with zero-voltage 2-way switch contacts, load
capacity AC/DC 24 V / 1.6 A.
- Two connections for power supply.
- Fingerprint module as a professional, biometric access control system based
on next-generation surface scanning technology.
- Scanning the deepest layer of skin using high frequency. High detection rate
and security against tampering.
- An evaluation of the unique characteristic features of the living human
finger.
- Detection of signs of life in the finger.
- Up to 99 fingers can be managed by the fingerprint reader.
- Reliable recognition of fingers with slightly damaged skin from gardening,
for example (damage only to the top layer of skin).
- Data protection through the use of encryption.
- Fast response time from application of finger to approval:approx. 1 s for up
to 30 stored fingers,approx. 3 s for up to 99 stored fingers.
- Night design of the fingerprint surface for orientation using white LED
illumination.
- 360° fingerprint readability.
- 3-colour LED status display for visual signalling when programming and
during operation.
- Master PIN number provided on included sealed safety card if Administrator
finger is no longer available. The device can be reset at the factory with the
accompanying safety card.
- Acknowledgement buzzer for acoustic signalling for user or installer.
- Warning tone in case of unauthorised removal of the fingerprint top unit,
i.e. tamper detection. Tampering circuit with switching actuator in the Gira
door communication system.
- The two integrated 2-way momentary contact relays can be assigned two
different fingers, e.g. thumb: control of door opening; index finger: switch
the outdoor lighting.
Inputs and outputs
- Connector strip connection cable for Gira door communication system.
Technische Daten:
Protection class
- System 55, Gira F100: IP20
- TX_44: IP44
Power supply
- from power supply for door communication: DC 24 V ±10%
- from door communication system: DC 26 V ± 2 V
Relay
- Quantity: 2
- Contact: 1 zero-voltage 2-way momentary contact
- Load capacity: AC/DC 24 V / 1.6 A
Connections
- Connection cable for door communication: 1 x connector strip
- Relay: 3 screw terminals each
- Additional power supply: 2 x screw terminal
Resistance to EMD: up to 15 kV
Installation depth: 33 mm
Ambient temperature: -20 °C to +70 °C
Hinweise:
- Keyless In devices can be connected to the Gira HomeServer using the DCS-IP
gateway. This enables intelligent links. In this way, e.g. temporary or
one-time access authorisation can be easily granted. All data including access
authorisations can be managed centrally and flexibly using the Gira
HomeServer.
- Children’s fingers can usually only be reliably recognised from 6 years of
age.
- Integration into Profile 55 possible.
Fabrikat: Gira
Bestell-Nr. 2617 76 grey matt (lacquered)
Menge: 0 Stk
Einzelpreis: 698.15 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx