KNX servo 3 [217600]
Servo 3 for KNX
Heating

Merkmale:
- Electric motor-driven servo with one binary input (zero-voltage) for
mounting on thermostat valve bases (recommendation: Heimeier) to control
heating and cooling systems.
- Suitable for room temperature control, e.g. on heaters, radiators,
convector heaters and heating circuit distributors on floor heating, etc.
- Screwed onto valve head.
- M30 × 1.5 mm connection.
- Integrated bus coupler. The servo is a proportional drive and can be
directly integrated into the KNX system (without additional bus coupler).
- Supply voltage is drawn from the KNX system.
- Integrated temperature sensor.
- Integrated room temperature controller.
- Mechanical indicator for valve travel.
- Automatic detection of valve travel.
- One input. This can be used as a binary input or for connecting an external
temperature sensor with the following functions: Switching, dimming, blinds,
as a dimming value transmitter, as a temperature value transmitter, as a
brightness value transmitter, as a light scene auxiliary unit with or without
memory function, as a remote temperature sensor or as a temperature limiter
for floor heating.
- Switching function: two self-contained switching objects available for each
input (switch commands can be parameterised individually), separate command
can be set for leading and trailing edge (ON, OFF, CHANGE, no reaction).
- Dimming function: Single and double-surface operation, time between dimming
and switching, telegram repetition and stop-telegram transmission possible.
- Blind function: Command can be set with rising edge (no function, UP, DOWN,
CHANGE), operating concept can be configured (Step - Move - Step or Move -
Step), time between short and long-term operation can be set (only with Step -
Move - Step), slat adjustment time can be set.
- Value transmitter function: Edge (button as NO contact, button as NC
contact, switch) and value with edge can be configured, value adjustment by
pressing and holding a button for value transmitters possible.
- Lighting scenario auxiliary unit with or without memory function.
- Can be used in a heating circuit distributor.
- Protection against jammed valves
- Corrected variable (1 bit or 1 byte).
- Cyclical monitoring of the corrected variable.
- Fault message object for drive faults.
- Emergency operation via internal temperature sensor.
- 2 forced settings or 1 forced setting and 1 limit value object can be set.
- Minimum and maximum variable limitation can be set.

Technische Daten:
KNX medium: TP256
Valve
- Connection: M30 x 1.5 mm
- Hub: 1.0 mm to 4.2 mm
- Regulating power: 80 N to 120 N
Cable length
- Connection cable: 1 m
- Length of the connection cable for each KNX line (sum total applies to all
servos present in the line): Max. 30 m
- Binary input/remote sensor: Max. 10 m
Number of servos for each KNX line: 30 units max
Protection class: IP40
Ambient temperature: 0 °C to 50 °C
Dimensions
- W x H x D: 

Fabrikat: Gira
Bestell-Nr. 2176 00 
Menge: 0 Stk
Einzelpreis: 0.00 Euro (o. MwSt.)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx